LOCKED MAILBOX (FULL SERVICE):

Image 1:
Top:
D

Left:
C
See note 1.

Right:
Incoming mail: .25 minimum height
E
Outgoing mail: .25 minimum height
See view A
Req'd marking (door front side)
See view A
See note 4.

Bottom:
A
See note 1.

Image 2:
Top:
4.00 sq. in. minimum No Sharp Edges
See note 6.

Left:
See note 5.
G
F
See note 2.
See note 3.

Right:
See note 7.

Bottom:
B
See note 1.

Ribbed Floor Detail
View A:
Ribbed Floor (from left to right):
.12 Min
1.00 Max
.19 Max

Units:Inches

Notes:

1. Dimensions A, B, and C are determined by manufacturer but must pass capacity test.
2. Maximum set back for slot is 2.00" when measured from front wall of the mailbox.
3. Compartment must be large enough to accommodate several 9.50"L x 4.25 H letters. Letters can be placed on backside of the carrier service door eliminating need for an out-going mail compartment provided mail does not fall out when door is opened.
4. A mat insert and other forming techniques are acceptable.
5. Handle shall be positioned within top 1/3 of carrier service door and provide 1.00" minimum finger clearance.
6. Front edge of flag must not be set back more than 2.00" when measured from front wall of mailbox.
7. Optional location of customer access door.

Back to the U.S. POSTAL SERVICE STANDARD MAILBOXES, CURBSIDE page.