Effective January 26, 2014, the Postal Service™ will revise Mailing Standards of the United States Postal Service, International Mail Manual (IMM®) sections 222.4, 222.5, 224, and various Individual Country Listings (ICLs) to reflect updated mail preparation requirements for Priority Mail Express International™ shipments.
In the article titled “IMM Revision: New Preparation Requirements for Priority Mail Express International Shipments” in Postal Bulletin 22365 (6-13-13, pages 10–12), we incorporated mailing standards for the new PS Form 2976-B, Priority Mail Express International Shipping Label and Customs Form (July 2013). We also stipulated that in a future Postal Bulletin article, we would announce when the March 2004 version of Label 11-B, Express Mail Post Office to Addressee, would no longer be authorized for Priority Mail Express International shipments — consequently, we are publishing this article to announce that Label 11-B will no longer be authorized effective January 26, 2014, and we will revise the following IMM standards accordingly.
Mailing Standards of the United States Postal Service, International Mail Manual (IMM)
* * * * *
2 Conditions for Mailing
* * * * *
220 Priority Mail Express International
* * * * *
222 Eligibility
* * * * *
222.4 Priority Mail Express International Flat Rate Boxes
* * * * *
[Remove the Note (which makes reference to Label 11-B) in its entirety.]
Exhibit 222.4 Eligible Priority Mail Express International Flat Rate Boxes
[In the first entry, in the column “Item No.,” remove the asterisk, and also remove the corresponding footnote (which makes reference to Label 11-B).]
* * * * *
222.5 Customs Forms Required
[Revise 222.5 in its entirety to read as follows:]
The mailer must complete the applicable customs form for the destination country as specified in the Individual Country Listing and, if applicable, fulfill any other nonpostal export requirements described in chapter 5. See IMM 224 for additional information.
For a mailer using PS Form 2976-B, Priority Mail Express International Shipping Label and Customs Form, or an online combined shipping label and customs form that electronically transmits customs-related data, no additional custom form is required because customs information is incorporated into the form that the mailer must complete.
* * * * *
224 Mail Preparation
[Revise 224 in its entirety to read as follows:]
224.1 Preparation by Sender
224.11 Using PS Form 2976-B
Prior to mailing, the sender must fulfill any nonpostal export requirements described in chapter 5 and do the following:
a. Enter both the sender’s and addressee’s full name and full address in the blocks provided. Include the sender’s telephone/fax number or email address.
b. In block (1), enter, if applicable, a USPS corporate account (USPSCA) number, federal agency account number, or Postal Service account number for payment by account.
c. In block (2), check all applicable boxes to indicate whether the package contains a gift, documents, commercial samples, or other items. Check the box for “Dangerous Goods” if the shipment contains mailable dangerous goods.
d. In block (3), enter the applicable Automated Export System (AES) Internal Transaction Number (ITN) or AES Exemption.
e. In block (4), provide a detailed description, in English, of each article. General descriptions such as “food,” “medicine,” “gifts,” or “clothing” are not acceptable. In addition to the English text, a translation in another language is permitted. If there is insufficient space on the form to list all contents, use a second form (and additional forms, if necessary) to continue listing the contents, and indicate on the first form that the contents are continued on one or more subsequent forms. When using this option, customers must ensure that the barcodes on the subsequent forms are totally obliterated to avoid multiple barcodes being assigned to the package. As noted in item 224.11m, place all subsequent forms listing the contents into PS Form 2976-E (plastic envelope).
f. In blocks (5), (6), and (7), enter the quantity, net weight (in pounds and ounces), and value (in U.S. dollars) of each article.
g. In block (8), enter, if known, the 6-digit Harmonized Tariff Schedule number, which is based on the Harmonized Commodity Description and Coding System developed by the World Customs Organization.
h. In block (9), enter the “Country of Origin,” which is the country where the goods originated — i.e., where they were produced/manufactured or assembled.
i. In block (10), enter the total weight (in pounds and ounces) of the package, including packaging (the total weight is used to calculate postage), and enter the total value in U.S. dollars.
j. In block (11), sign and date the form. The sender’s signature certifies that all entries are correct and that the item contains no undeclared dangerous, prohibited, or restricted contents per postal, customs, or destination country regulations.
k. In blocks (12) and (13), enter the applicable number if the item requires a sender’s customs reference or importer’s reference.
l. In blocks (14), (15), and (16), enter license, certificate, and/or invoice number, if applicable.
m. Insert the completed form and all other required documents — e.g., a commercial invoice, additional subsequent forms (see item 224.11e) — into PS Form 2976-E (plastic envelope) and affix PS Form 2976-E to the address side of the package.
n. Allow the Postal Service employee to complete PS Form 2976-B as described in 224.2.
224.12 Using an Online Combined Shipping Label and Customs Form That Electronically Transmits Customs-Related Data
Prior to mailing, the sender must fulfill any other nonpostal export requirements described in chapter 5 and fully complete the applicable online customs form.
224.2 Preparation by Acceptance Employee
224.21 Using PS Form 2976-B
Employees must do the following:
a. Verify that the sender has entered on the form the information required by 224.1 and has signed and dated the declaration.
b. Instruct the sender to complete any incomplete portions of the form. Remind the sender that failure to complete the form properly can delay delivery of the item or inconvenience the sender and addressee. Further, a false, misleading, or incomplete declaration can result in the seizure or return of the item and/or in criminal or civil penalties. The Postal Service assumes no responsibility for the accuracy of information that the sender enters on PS Form 2976-B.
c. To comply with U.S. Census Bureau requirements, it is the customer’s responsibility to ensure that an appropriate AES ITN, AES Exemption, or AES Downtime Citation is displayed on PS Form 2976-B, if required. If this information is not entered, remind the customer that he or she may be subject to civil and criminal penalties for noncompliance.
d. If the sender purchases additional insurance against loss, damage, or missing contents, the retail associate will record the insured amount in U.S. dollars on PS Form 2976-B in the space provided.
e. Weigh the Priority Mail Express International package. Enter the weight, insured amount, and insurance fee (if applicable — see 222.71 and 222.72), originating facility ZIP Code, postage, total postage/fees, date and time received, and scheduled delivery date in the shaded areas provided on the form.
f. Apply the correct amount of postage to the mailpiece, or ensure that the correct amount of postage is affixed to the mailpiece.
g. Round stamp the form in the appropriate place on each copy (Copies 1–5).
h. Remove the Post Office copy (Copy 4) and tell the mailer that the Postal Service will retain this document for 30 days as a record of mailing. Remove the Sender copy (Copy 5) and give it to the mailer.
i. Round stamp any uncanceled stamps, and if postage is paid by meter, round stamp the front of the piece near the meter postage.
j. After acceptance, place each item in the appropriate working pouch for forwarding to the international exchange office authorized to dispatch Priority Mail Express International shipments to that destination. (See Handbook T-5, International Mail Operations.)
Note: Consistent with IMM 225.12, the customer must present any item bearing a handwritten PS Form 2976-B to an employee at a Post Office retail service counter.
224.22 Using an Online Combined Shipping Label and Customs Form That Electronically Transmits Customs-Related Data
Employees must do the following:
a. If presented to a USPS acceptance employee, check to ensure the mailer has completed the sender’s information, the addressee’s information, and the customs information portions.
b. Apply the correct amount of postage to the mailpiece, or ensure that the correct amount of postage is affixed to the mailpiece.
c. After acceptance, place each item in the appropriate working pouch for forwarding to the international exchange office authorized to dispatch Priority Mail Express International shipments to that destination. (See Handbook T-5, International Mail Operations.)
Note: For online shipments, customer receipts are not necessary; for non-IRT or non-POS offices, record the required finance information on the special form provided for this purpose.
* * * * *
Individual Country Listings
* * * * *
Albania
[Editor’s Note: We are using Albania as an example, but this revision applies to each country that offers Priority Mail Express International service.]
* * * * *
Priority Mail Express International (220)
* * * * *
Customs Form Required (123)
[For Albania and also for each country that offers Priority Mail Express International service, revise the footnote below the customs form table to read as follows (for clarity, we are including the entire table for Albania and, just for this Postal Bulletin article, using bold font to emphasize the revised text):]
Note: For mailers completing PS Form 2976-B or an online combined shipping label and customs form that electronically transmits customs-related data, no additional customs form is required (see 222.5).
* * * * *
When effective, we will incorporate this information into the online IMM, which is available via Postal Explorer® at http://pe.usps.com.
— Product Classification,
Pricing, 10-31-13
